2.83″ AMOLED Display

The 2.83″ AMOLED display is a very high quality, high viewing angle, crisp and clean viewing display that is suited to a large range of applications.

Embedded at the heart of the design is the PICASO processor, which is driven by a highly optimised virtual core engine called EVE (Extensible Virtual Engine). An extensive range of hardware and software peripherals have been integrated into the design, to give the user freedom to adapt the module to suit almost any application.

The uOLED-32028-P1(T) is a clever combination of a 2.83″ (240×320) AMOLED Display, audio amplifier and speaker, micro-SD card connector, along with a group of general purpose input/output pins (GPIO’s), including I2C and serial COMMS.

Information about the display

  • Low-cost OLED display graphics user interface solution.
  • 240 x 320 QVGA resolution, 65K true to life colours, AMOLED screen.
  • Screen Size: 2.83″, 49.1mm x 67.3mm
  • Viewing Area: 42.3mm x 57.6mm
  • Non-Touch and Resistive Touch Screen versions
  • The controller boards have mechanical support via mounting tabs which can be snapped off.
  • Board Size: 49.1 x 67.3 x 11.0mm (not including 3 x mounting tabs with 3mm holes for mechanical support).
  • No back lighting with near 180° viewing angle.
  • Integrated 4-Wire resistive Touch Panel.
  • Easy 5 pin interface to any host device: VCC, TX, RX, GND, RESET
  • Powered by the 4D-Labs PICASO processor
  • 14KB of flash memory for user code storage and 14KB of SRAM for user variables, or 14KB shared user code and program variables.
  • 2 x Asynchronous hardware serial ports (COM0, COM1), TTL interface, with 300 baud to 600K baud.
  • 1 x I2C interface (Master).
  • 8 x 16 bit timers with 1 millisecond resolution.
  • 13 x GPIO pins. Upper 8 bits can be used as an I/O Bus for fast 8-bit parallel data transfers.
  • On-board micro-SD memory card socket for multimedia and data logging with SDHC memory card support. A SPI compatible micro-SD card is required.
  • DOS compatible file access (FAT16 format) as well as low level access to card memory.
  • Dedicated PWM Audio pin supports FAT16 audio WAV files and complex sound generation.
  • On-board audio amplifier with a tiny 8 Ohms speaker for sound generation and WAV file playback.
  • Built in extensive 4DGL graphics and system library functions. For all available features and functions under the 4DGL programming language.
  • Display full colour images, animations, icons and video clips.
  • Supports all available Windows fonts and characters.
  • 2 x 30 pin headers for I/O expansion.
  • 4.0V to 5.5V range operation (single supply).
  • RoHS Compliant.

The UOLED-32028-P1 includes the following items:

  • uOLED-32028-P1 Display Module
  • 150mm 5 way Female-Female jumper cable
  • 5 way Male-Male adaptor
  • Getting Started Manual Available as a Download

If you are a first time user and just beginning your development, we strongly recommend purchasing a Starter Kit of this same model as it includes additional items that allow you to get started with your development immediately.

Starter Kit part number is SK-UOLED-32028-P1.

SPECIFICATIONS

Diagonal Display Size INCHES

2.8

Resolution

240×320

Brightness

~200 cd/m2

Touch

Resistive-Touch

Controller

PICASO

Operating Ambient Temperature

-30°C to +70°C

Storage Temperature

-40°C to +80°C

Connector

5 pin Interface

Display Viewing Area (mm)

42.30 x 57.60

Module Dimensions (mm)

49.1 x 67.30 x 11.00

RoHS?

Yes

Country of origin

Australia

CCCN / tarif code

85312000

ECCN export control code

EAR99

TARIC Code

8531209590

AHECC Code

85312000

Package Dimensions L x W x H (mm)

125 x 105 x 41

Product Weight (g)

50

Weight with Packaging (g)

77

REACH

Yes

CE Mark

Yes

Supply Voltage

4.5V – 5.5V DC

Supply Current

~80mA

Frame Rate

8.5 fps

colours

RGB 65K

Processor Capability

650K Pixels / second

SD Card Slot

Yes – RAW or FAT16 Support. SPI Compatible microSD Cards Only

Flash

14KB

RAM

14KB

I2C

Yes

GPIO

14 x GPIO

SPI

Used for SD Card Slot

Codeless Programming

Yes

IDE

4D Workshop4 IDE

Serial Speed

300 to 600K baud

Serial Interfaces

2

8-bit Parallel Transfer

Yes

Viewing Angle

Standard Viewing Angle

SIZE & WEIGHT

Viewing Area: 42.30 x 57.60 mm

Module Width: 49.1 mm

Module Height: 67.30 mm

Module Depth: 11 mm

Module Weight: 50 g

WORKSHOP4 IDE

Workshop4 is a comprehensive software IDE for Microsoft Windows that provides an integrated software development platform for all of the 4D family of processors and modules. The IDE combines the Editor, Compiler, Linker and Downloader to develop complete 4DGL application code.

All user application code is developed within the Workshop4 IDE.

DEVELOPMENT ENVIRONMENTS THAT SUITS ANY APPLICATION & USER LEVEL

Workshop4 includes four development environments for the user to choose based on application requirements or even user skill level.

WORKSHOP4 PRO

Make complex widget design, simple.

Smart Widgets Editor is a powerful utility which enables the generation of Smart Widgets.

  • Users can create complex widgets with up to six layers, including the layer for the base image. The order of the layers can be arranged as desired.
  • Each layer can contain one or more images arranged in sequence that can be manipulated in a variety of ways. Image manipulation options include horizontal motion, vertical motion, and angular motion. Additionally, the transparency of a layer can be set.
  • Two or more layers can be linked to produce synchronized movements of images. This enables the generation of complex widgets with multiple moving parts. Clockwork feature is also supported. This enables users to quickly generate clock widgets.
  • Each layer can have a numeric part which can display numbers in various fonts and formats. Alternatively, the numeric part can be a fixed sequence of text.
  • The output frames can be utilized using any of the supported Workshop4 environments.

GENIE MAGIC

Genie Magic is an extension to ViSi-Genie, which is available in Workshop4 PRO. Genie Magic allows the User to add 4DGL code to various points in the ViSi-Genie backend code, which allows Users to take full advantage of the power of 4DGL, while retaining the speed and convenience of ViSi-Genie and its defined communication protocol.

Genie Magic allows you to enter 4DGL code in the form of Events, Code and Objects, along with various touch related additions too, giving you to the power to achieve advanced GUI’s in ViSi-Genie without having to write the full code yourself.

Genie Magic is fully supported by the genieArduino and geniePi libraries, making communication with an Arduino or Raspberry Pi host even more powerful.

When using Genie Magic in combination with the Smart Widget Editor, it is possible to use the Smart Widgets Editor tool and Smart Widgets to create other graphical user interface elements such as:

  • Dropdown Menu

  • Side Menu

  • ‘Carousel Slider’

  • List Box

  • Dock Menu
  • Quarter-Rotary Menu

  • Fading Slide-To-Unlock Button

  • Spectrum With Transparency

  • And Many Others

DOWNLOADS

Compatibility: Workshop4 is a Windows-only product. It is compatible with Windows 8 through to Windows 11.

Note some older OS such as ME, Vista, XP and 7 have not been tested for some time and are not supported by Microsoft anymore; however, they may still work.
Legacy support updates for the older OS may not be possible, depending on what issues are found. For best results, run a current Windows OS. It is possible to run Workshop4 under a VM on Linux or Mac. However, it is up to the User to set this up.

RFQ – VOLUME ORDERS

We are delighted to offer volume discounts to qualified customers and organizations.

Our dedicated Volume Sales team will address your specific requirements and help you get an accurate quotation in a timely manner.