Small and Compact

Perfect for Product Integration

TED-130X is the OEM version of the unique TIMI-130 module. It is aimed at product integration where the TIMI-96 form factor may not be suitable.

TED-130X is a 1.3” TFT IPS LCD display module driven directly by a PIXXI-44 graphics processor from 4D Labs. It features castellated and through-hole pads at each end, allowing for different mounting options.

TED-130X was created to be used in products or projects after development on the TIMI-130 module, where a permanent installation is required. TED-130X was designed as a flexible design aid, primarily to simulate components readouts and meters, which would otherwise be cumbersome or demanding on hardware resources for breadboard or electronic development. Simulating component readouts allows accelerated development and retains the often-limited GPIO hardware associated with many developments. TED-130X then steps in after this development has been done for integration into a product.

1.3″ Full Colour RGB-IPS Display

Wrapped in a sleek metal frame, TED-130X can be viewed at any angle. Boasting a full RBG (65K vivid colours) IPS display with 240×240 resolution.​

PIXXI-44 Graphics Processor

Powered by an embedded graphics processor which hosts built-in services to view high-quality widgets, images, icons and even video.​

Library of Pre-Designed Pages

With a library of hundreds of pre-designed pages that are ready to use, no wasted time is required to design realistic GUIs.

Compact and Easy to integrate

Thanks to the castellation PCB design, the TED-130X is easy to integrate with any project or product.

TED-130X Features

TED-130X’s main interface is a 3.3V-level Asynchronous Serial UART and features 14 GPIO (11 more than TIMI-130 and TIMI-130X) that can be used as Digital or Analog inputs, Digital Outputs, Master I2C Communication, or PWM Audio output. These interfaces arm TEDX-130 with resources to be either a stand-alone controller, a host-driven slave, or a tethered test instrument while being capable of interfacing and powering external devices.

  • Powered by 4D Labs PIXXI-44 Graphics Processor
  • 240(W)x240(H) resolution TFT IPS LCD, non-touch
  • 3.3V (5V tolerant) Serial UART interface, capable 300 to 2187500 Baud
  • Master I2C (3.3V level) interface bus
  • 4 GPIO (3.3V level), 4 capable of Analog, and 1 pair as I2C
  • 32MB of External SPI Flash Memory
  • 32KB of Processor Flash Memory
  • 30KB of Processor SRAM for User Variables
  • Single supply 5V power input (*3.3V possible – See ‘System Pins’ Section)
  • Dedicated 3.3V 500mA power output for User
  • Standard 0.1” (2.54mm) pitch castellated and through hole pads
  • RoHS and REACH compliant
  • PCB is UL 94V-0 Flammability Rated
  • Weight approx. 7.0 grams