Small and Compact

Perfect for Product Integration

TED-96 is the OEM version of the unique TIMI-96 module. It is aimed at product integration where the TIMI-96 form factor may not be suitable.

TED-96 is a 0.96” TFT IPS LCD display module driven directly by a PIXXI28 graphics processor from 4D Labs. It features castellated and through-hole pads at each end, allowing for different mounting options.

TED-96 was created to be used in products or projects after development on the TIMI-96 module, where a permanent installation is required. TED-96 was designed as a flexible design aid, primarily to simulate components readouts and meters, which would otherwise be cumbersome or demanding on hardware resources for breadboard or electronic development. Simulating component readouts allows accelerated development and retains the often-limited GPIO hardware associated with many developments. TED-96 then steps in after this development has been done for integration into a product.

0.96″ Full Colour RGB-IPS Display

Wrapped in a sleek metal frame, TED-96 can be viewed at any angle. Boasting a full RBG (65K vivid colors) IPS display with 160×80 resolution.​

PIXXI-28 Graphics Processor

Powered by an embedded graphics processor which hosts built-in services to view high-quality widgets, images, icons and even video.​

Library of Pre-Designed Pages

With a library of hundreds of pre-designed pages that are ready to use, no wasted time is required to design realistic GUIs.

Compact and Easy-to-Use Bus System

Thanks to the castellation PCB design, the TED-96 is easy to integrate with any project or product.

TED-96 Features

TED’s main interface is a 3.3V-level Asynchronous Serial UART and features 3 GPIOs that can be used as Digital or Analog inputs, Digital Outputs, Master I2C Communication, or PWM Audio output. These interfaces arm TIMI with resources to be either a stand-alone controller, a host-driven slave, or a tethered test instrument while being capable of interfacing and powering external devices themselves.

  • Powered by 4D Labs PIXXI-28 Graphics Processor.
  • 160×80 pixel resolution TFT LCD (non-touch).
  • 3.3V (5V tolerant) serial UART interface (300 to 2187500 Baud).
  • Master I2C (3.3V level) interface bus.
  • 3 GPIO (3.3V level): 2 analog or I2C, 1 PWM Audio.
  • 16MB Flash Memory.
  • 32KB of Processor Flash Memory.
  • 14KB of Processor SRAM for User Variables.
  • 5Vdc supply input (3.3V possible).
  • Dedicated 3.3V 500mA power output for User.
  • Castellation PCB design with pin headers (0.1” / 2.54mm).
  • RoHS and REACH compliant.
  • PCB is UL 94V-0 Flammability Rated.
  • Weight approx. 5.0 grams.