The Splash screen will appear after a set timeout period.

To avoid the splash screen from appearing on the display, sending a command before the timeout ends will be the best option.

Yes, since both display has the same pixel size of 800 x 480.

You can use the same SD card resource in your application.

The parallel task is not possible with the Diablo16 graphics processor.

Flashbanks use the same flash memory as the Diablo16 which has an endurance of 10000 erase/write cycles.

Diablo16 display modules support up to 2M Baud.

Yes, it supports Dallas One-Wire.

No, it does not. The Diablo16 processor only supports 16-bit images.

You can save your variables to Flash Banks that are not in use. You can also it to the microSD card.

Yes, however, there are so many variants of the display driver ICs that it is difficult to cover all of them into separate driver files. Diablo16 modules need a specific driver file with the display initialization settings fully built-in. At the moment, the only supported drivers are the ones used by 4DLCD products.

If you’re interested in using a 4D graphics processor with a custom display, please submit a ticket to contact the technical support team.

You can try utilizing 4FN and 4XE files. These will allow you to compile 4DGL code and save it to Diablo16’s Flash Banks or microSD.

These files can be called/run when needed by your main program.