MOTG, Modules-on-the-Go, is a concept from 4D Systems revolutionizing embedded design, allowing instant and flexible hardware expansion solutions.

MOTG modules offer a simple plug-and-play interface to Universal MOTG Interface (UMI), allowing rapid assembly and maintenance. This removes the hassle of soldering and ending up with a wiring nest. It also allows the designer to easily remove the existing module or add another one instead, which could be very useful during the prototyping phase.

Importantly, the MOTG series was designed with careful consideration for space with its compact and low-profile design.

All existing MOTG products interfaced using Serial UART can be used with a Picaso display. Any future I2C-based MOTG product should also be compatible.

MOTG products can be interfaced with uLCD products using a MOTG-Breadtooth board. This board allows you to breakout the MOTG pins to a breadboard and connect to it during development.

It is advisable to consider adding a UMI slot to your final application board.

All existing MOTG products that are interfaced using Serial UART and SPI can be used with a Diablo16 display. Any future I2C-based MOTG product should also be compatible.

MOTG products can be interfaced with uLCD products using a MOTG-Breadtooth board. This board allows you to breakout the MOTG pins to a breadboard and connect to it during development.

It is advisable to consider adding a UMI slot in your final application board.

MOTG products can be easily interfaced with gen4-uLCD products using gen4-MOTG-AC boards.

For gen4 Diablo displays, you can choose the accessory board based on the size of the display:

• gen4-MOTG-AC1   :  2.4″ and 2.8″
• gen4-MOTG-AC2   :  3.2″ and 3.5″
• gen4-MOTG-AC4   :  4.3″