- Starter Kit for Resistive-Touch 3.2" Intelligent TFT-LCD Module for Raspberry Pi projects that includes everything you need to get started with development.
- The Starter Kit is recommended for first time users of the uLCD-32PTU-Pi Display Module.
- See complete description in the product details below.
3.2" TFT LCD Intelligent Display Module for the Raspberry Pi A, B and B+
The uLCD-32PTU-PI is a Raspberry Pi Display Module Pack, which includes a uLCD-32PTU 3.2" LCD Display with Resistive Touch, a 4D Pi Adaptor and 5 way interface cable.
The uLCD-32PTU-PI customises the uLCD-32PTU Display specifically for interfacing with the Raspberry Pi, to provide a quick and easy interface without any wiring hassles.
The Raspberry Pi Display Module Pack enables a Raspberry Pi user to quickly connect the 4D Pi Adaptor Shield to their Raspberry Pi, connect the 5 way cable between the Adaptor and the Display Module, and be connected in seconds to start programming their new 4D Systems Display.
The uLCD-32PTU-PI has a comprehensive ViSi-Genie library written to communicate with the Raspberry Pi, allowing the Visi-Genie events to be easily understood by the Raspberry Pi and users code.
Utilises the Raspberry Pi's UART Serial Port.
For a detailed listing of the capabilities of the display module in this Raspberry Pi Pack, please refer to the datasheet for the display itself, available from the Product Page of the uLCD-32PTU.
Information about the display module
- 3.2” Intelligent LCD-TFT display module powered by Picaso processor
- 240x320 VGA resolution, RGB 65K true to life colours, TFT screen with Integrated 4-Wire Resistive Touch Panel
- Easy 5 pin interface to any host device:
VCC, TX, RX, GND, RESET.
- Powered by the 4D-Labs PICASO processor (also available as separate OEM IC)
- 14KB of flash memory for user code storage and 14KB of SRAM for user variables, or 14KB shared user code and program variables
- 2 x Asynchronous hardware serial ports (COM0, COM1), TTL interface, with 300 to 600K baud
- 1 x I2C interface (Master)
- 8 x 16 bit timers with 1 millisecond resolution
- 13 x General Purpose I/O pins. Supports fast 8-bit parallel data transfer through Upper 8 bits
- On-board micro-SD memory card socket for multimedia and data logging with SDHC memory card support. A SPI compatible micro-SD card is required
- DOS compatible file access (FAT16 format) as well as low level access to card memory
- Lithium Polymer battery support, with built in battery charger and automatic change-over
- Dedicated PWM Audio pin driven by WAV files from micro-SD card
- On-board audio amplifier with a tiny 8Î© speaker for sound generation and WAV file playback
- Built in extensive 4DGL graphics and system library functions
- Display full colour images, animations, icons and video clips
- Supports all available Windows fonts
- A 30 pin header for I/O expansion and future plug-in daughter boards
- 4.0V to 5.5V range operation (single supply)
- Module dimensions: 56.3 x 80.5 x 15.9mm (including corner plates)
- Weighing ~ 50g.
- Display Viewing Area: 48.60 x 64.80mm
- 4 x corner plates with 2.7mm holes for mechanical mounting
- RoHS Compliant
- CE Compliant (On modules with CE Mark)
The SK-32PTU-Pi includes the following items:
4D Serial Pi Adaptor
uUSB-PA5-II Programming Adaptor
4GB Industrial microSD Card
150mm 5 way female jumper cable
- 5 way Male-Male adaptor
Workshop4 is a comprehensive software IDE for Microsoft Windows that provides an integrated software development platform for all of the 4D family of processors and modules. The IDE combines the Editor, Compiler, Linker and Downloader to develop complete 4DGL application code.
All user application code is developed within the Workshop4 IDE.
Workshop4 includes four development environments for the user to choose based on application requirements or even user skill level.
This environment enables the user to write 4DGL code in its natural form to program the display module.
ViSi - Genie
An advanced environment that does not require any 4DGL coding at all. Everything is done automatically for you. Simply lay the display out with the objects you want (similar to ViSi), set the events to drive them and the code is written for you automatically. ViSi-Genie provides the latest rapid development experience from 4D Systems.
A visual programming experience that enables drag-and-drop type placement of objects to assist with 4DGL code generation and allows the user to visualise how the display will look while being developed.
This environment is also provided to transform the display module into a slave serial display module. It allows the user to control the display from any host microcontroller or device with a serial port.
SMART WIDGETS EDITOR
Smart Widgets Editor is a powerful utility which enables the generation of Smart Widgets.
- Users can create complex widgets with up to six layers, including the layer for the base image. The order of the layers can be arranged as desired.
- Each layer can contain one or more images arranged in sequence that can be manipulated in a variety of ways. Image manipulation options include horizontal motion, vertical motion, and angular motion. Additionally, the transparency of a layer can be set.
- Two or more layers can be linked to produce synchronized movements of images. This enables the generation of complex widgets with multiple moving parts. Clockwork feature is also supported. This enables users to quickly generate clock widgets.
- Each layer can have a numeric part which can display numbers in various fonts and formats. Alternatively, the numeric part can be a fixed sequence of text.
- The output frames can be utilized using any of the supported Workshop4 environments
Genie Magic is an extension to ViSi-Genie, which is available in Workshop4 PRO. Genie Magic allows the User to add 4DGL code to various points in the ViSi-Genie backend code, which allows Users to take full advantage of the power of 4DGL, while retaining the speed and convenience of ViSi-Genie and its defined communication protocol.
Genie Magic allows you to enter 4DGL code in the form of Events, Code and Objects, along with various touch related additions too, giving you to the power to achieve advanced GUI's in ViSi-Genie without having to write the full code yourself.
Genie Magic is fully supported by the genieArduino and geniePi libraries, making communication with an Arduino or Raspberry Pi host even more powerful.
When using Genie Magic in combination with the Smart Widget Editor, it is possible to use the Smart Widgets Editor tool and Smart Widgets to create other graphical user interface elements such as:
- Dropdown Menu
- Side Menu
- 'Carousel Slider'
- List Box
- Quarter-Rotary Menu
- Dock Menu
- Fading Slide-To-Unlock Button
- Spectrum With Transparency
- And Many Others