0.96″ Smart micro OLED Display with PIXXI-28 Integration

The uOLED-96P2 is an impressive Pixxi-28 OLED display module in the 4D Systems micro OLED graphics display range and an upgrade to the original Goldelox-based uOLED-96G2. Combining a resolution of 0.96″ 96×64 pixels with 65K True-to-Life colours, this display module is perfect for animations, slideshows, and other multimedia presentations. It is the ideal size for attractive embedded display applications.

This module is a compact and cost-effective Intelligent Display Module using the latest state-of-the-art Passive Matrix OLED (PMOLED) technology. Driving the module and its peripherals is the Pixxi-28 processor, a very capable chip that provides impressive graphics power, programmed with 4D Systems Workshop4 IDE Software.

4D Systems Workshop4 IDE enables graphic solutions to be constructed rapidly and with ease due to its design being solely for 4D graphics controllers.

The uOLED-96P2 has a modest but comprehensive range of features suited for an application requiring a bright eye-catching display, an analog input, Dallas 1-wire sensor capability, audio generation, or simply digital I/O. This is truly an impressive little module.

Some of the significant upgrades from the Goldelox version of this module include FAT file system capability, uSD or Flash storage, considerably more processor Flash and RAM, a Faster Processor with more features, and ViSi-Genie capability, all of which improve on what was available with the original Goldelox modules.

Information about the display module

  • Low-cost 0.96″ OLED display graphics user interface solution.
  • 96 x 64 resolution, RGB 65K true to life colours, PMOLED Screen, non-Touch only.
  • No backlighting with a nearly 180° viewing angle.
  • Easy 10 pin interface to any host device: 3.3Vout, IO2, GND, IO1, RESET, GND, RX, TX, +5V, 5V OUT
  • Powered by the 4D-Labs Pixxi-28 processor.
  • 32KB of flash memory for user code storage and 14KB of RAM for user variables.
  • Asynchronous hardware serial UART port with auto-baud, TTL interface, with 300 to 2.1M baud
  • 2 x General Purpose I/O pins, IO7 and IO8 on the Pixxi-28.
  • IO7 supports:
    • Analog Input with 12-bit resolution
    • Dallas 1-Wire
    • Digital Input/Output
    • Frequency Output for driving things like a Piezo buzzer/speaker with a pure square wave
    • RTTTL tune engine for driving a speaker with audio tunes
  • IO8 supports:
    • Dallas 1-Wire
    • Digital Input/Output
    • Frequency Output for driving things like a Piezo buzzer/speaker with a pure square wave
    • RTTTL tune engine for driving a speaker with audio tunes
    • Audio generation for driving a speaker with WAV files
  • Onboard micro-SD memory card adaptor (on selected model) for multimedia storage and data logging purposes. HC memory card support is also available for cards larger than 4GB.
  • 16MB Serial Flash memory (on selected model) for multimedia storage, data files, and fonts, or for holding extra code functions (to expand the code storage of the processor).
  • Built-in extensive 4DGL graphics and system library functions.
  • Display full-colour images, animations, icons, and video clips.
  • Supports all available Windows fonts and characters.
  • 4.0V to 5.5V range operation (single supply), nominal 5.0V.
  • Module dimensions: 32.7 x 26.7 x 13.2 mm (including mounting tabs), 4 x 2 mm holes.
  • Weight ~ 5.5g
  • Display Viewing Area: 20.1 x 13.4 mm
  • RoHS and REACH Compliant.
  • PCB is UL 94V-0 Flammability Rated

The uOLED-96P2 includes the following items:

  • uOLED-96P2 Smart Display Module
  • 150mm 5-way Female-Female Jumper Cable
  • 5-way Male-Male Adaptor
  • Getting Started Guide Available as a Download

Suppose you are a first-time user and just beginning your development. In that case, we strongly recommend purchasing a Starter Kit of this same model as it includes additional items that allow you to get started with your development immediately.

The Starter Kit part number is SK-96P2.

SPECIFICATIONS

Display Size (Inches)

0.96

Display Resolution

96×64

Colours

RGB 65K

Display Viewing Area (mm)

20.1 x 13.4

Brightness

100 cd/m2

Backlight LEDs

NO

Touch Type

Non-Touch

Viewing Angle

Standard Viewing Angle

Controller

PIXXI 28

RAM

14KB

Flash

32KB

I2C

No

GPIO

2 x GPIO

Serial Interfaces

1

SPI

Used for SD Card Slot

8-bit Parallel Transfer

No

Serial Speed

300 to 2187500 baud

SD Card Slot

Yes – RAW or FAT16 Support. SPI Compatible microSD Cards Only

Supply Voltage

4.0V-5.5V DC

Supply Current

TBD

Operating Ambient Temperature