Product Categories and Filters
Workshop5
Workshop5 IDE builds on the trusted foundation of Workshop4, delivering a more advanced, flexible, and intuitive environment for developing GUIs on 4D Systems displays. Designed to support faster and more efficient embedded graphics development, it introduces enhanced tools, optimised workflows, and broader capabilities. Workshop5 is fully compatible with 4D Systems’ range of processors and modules, providing engineers with greater control, performance, and ease of integration across a wide variety of applications.
FREE
30-pin Flexible Flat Cable (FFC) with 0.5mm pitch (opposite way), available in length variable from 22mm to 200mm. Compatible with a standard 30-pin, 0.5mm pitch, 0.3mm thick FFC connector. This cable on one end has contacts on the top of the cable, and the other end has contacts at the bottom of the cable. The 4D-FFC- cables are ideal for connecting all the 4D Systems displays to any host board.
US$1.95 – US$2.95
The 4D-FPC-PIXXILCD is a 30-way, 0.5mm pitch flexible printed circuit cable, purpose-built for high-reliability connections between PIXXILCD intelligent display modules and carrier boards. Designed to support high-speed signal transmission with minimal loss, it ensures mechanical flexibility and durability in space-constrained embedded applications, enabling clean, robust integration in professional and industrial environments.
US$2.50
Enhance your development setup with the 5 5-pin ribbon cable from 4D Systems. Designed for compatibility with our intelligent display modules, this 5-way female-to-female ribbon cable, accompanied by a male-to-male adapter, offers flexible and reliable serial communication. Ideal for prototyping and integration, it ensures seamless connections between your display modules and host systems, streamlining your development process.
US$3.00
MatesBUS Headers (2.54mm/0.1 pitch) are customised into a single moulding with side labels for convenience. Two models are available: flat and 45-degree angle viewing of the attached MatesBUS-compatible product, and they can be soldered on a PCB.
US$4.00 – US$5.00
The gen4 Interface Board (gen4-IB) provides a simple, reliable connection between gen4 Intelligent Display Modules and external programming or host interfaces. It converts the 30-way FFC into five essential signals for programming and communication, supporting uUSB-PA5, uUSB-PA5-II, and 4D Programming Cable.
US$5.95
The gen4-Breakout Board offers direct access to all 30 signals from 4D gen4 and pixxiLCD modules via convenient through-hole pads. Featuring a 30-way top-contact FFC connector, it simplifies development, prototyping, and integration by eliminating conflicts with USB interfaces. Compatible with all 30-way FFC modules, it enables flexible, breadboard-friendly connections without requiring direct management of the FPC.
US$6.00
The gen4-Breakout Board offers direct access to all 30 signals from gen4-RP2350 Series display modules via convenient through-hole pads. Featuring a 30-way top-contact FFC connector, it simplifies development, prototyping, and integration by eliminating conflicts with USB interfaces. Compatible with all 30-way FFC modules, it enables flexible, breadboard-friendly connections without requiring direct management of the FPC.
US$6.00
The gen4-RP2350 Connection Kit includes everything necessary to connect the gen4-RP2350 Series displays I/O to any host board or breadboard. It comprises the 30-pin Flexible Flat Cable (15 cm long) and the gen4-RP2350-Breakout board.
US$7.00
The MB Adaptor provides any board supporting the mikroBUS™ socket with a MatesBUS interface to connect any TIMI or REPTOR models directly.
US$9.00
The 4D Serial Pi Adaptor provides a simple, direct serial interface between Raspberry Pi boards and 4D Systems display modules using a 5-pin connection. Featuring a pass-through header design, it maintains compatibility with other Raspberry Pi accessories. Supplied with jumper cables, it supports 5V power and works with all Raspberry Pi models.
US$9.95
The Mates Programmer is a simple USB programmer for the Breadboard Mates series. It provides a simple 5-way programming interface and a selection option for programming other devices.
US$10.00
- Custom embedded 4DGL graphics controller designed to interface with many popular OLED and LCD displays.
- Powerful graphics, text, image, animation and countless more features are built right inside the chip.
- Offers a simple plug-n-play interface to many 8bit 80-Series colour LCD and OLED displays.
- GOLDELOX is not available for purchase from our online store. If you wish to purchase, please contact our sales team.
US$10.95
The gen4-PA is a programming adaptor and breakout board for gen4 Intelligent Display Modules powered by Picaso or Diablo16 processors. It combines USB programming capability with easy access to all 30 FFC signals via 2.54mm pads. Compatible with Arduino and Raspberry Pi interfaces, it enables streamlined programming, prototyping, and integration without the need for a separate programmer.
US$10.95
The 4D-UPA (Universal Programmer Adaptor) provides a reliable interface for programming, updating, and configuring 4D Systems display modules and processors. Featuring a 30-way, 0.5mm pitch FPC connector, it ensures high-speed, stable communication with Workshop4 IDE, making it ideal for development, prototyping, and volume production environments.
US$10.95
These plastic bezels are designed to provide a sleek and secure mounting solution for uLCD and gen4-uLCD intelligent display modules. Available for a variety of display sizes and types, they facilitate easy panel mounting without the need for additional washers or complex drilling.
US$10.99 – US$19.95
The gen4-4DPI-Adaptor enables seamless connection between Raspberry Pi boards and 4D Systems gen4-4DPI Primary Displays. Supporting resistive and capacitive models across 4.3", 5.0", and 7.0" sizes, it delivers high-speed SPI communication, touch control, and complete primary display functionality without external power. Compatible with all Raspberry Pi models.
US$12.95
- A custom-embedded 4DGL graphics controller designed to interface with many popular OLED and LCD panels.
- The latest addition to the 4D Systems processor range, provides more power, more FLASH, more RAM, and more features.
US$13.50
This adaptor allows a standard Raspberry Pi to connect products of any TIMI or REPTOR models directly to the Raspberry Pi bus via the MatesBUS interface.
US$14.00
The 4D Serial Pi Adaptor provides a simple, direct serial interface between Raspberry Pi boards and 4D Systems display modules using a 5-pin connection. Featuring a pass-through header design, it maintains compatibility with other Raspberry Pi accessories. Supplied with jumper cables, it supports 5V power and works with all Raspberry Pi models.
US$14.95
- Custom embedded 4DGL graphics controller designed to interface with many popular OLED and LCD displays.
- Powerful graphics, text, image, animation and countless more features are built right inside the chip.
- Offers a simple plug-n-play interface to many 16-bit 80-Series colour LCD and OLED displays.
- The PICASO is not available for purchase in our online store. If you wish to purchase, please contact our sales team.
US$15.95
The 4DLCD Series comprises a range of high-performance displays from 4D Systems. These displays are designed to meet a wide variety of engineering requirements. The series includes standard TFT LCDs as well as advanced TFT IPS displays, with models ranging from 1.44 to 9.0 inches. The displays offer options for capacitive touch and high-resolution interfaces, including MCU, SPI, and Parallel RGB-24bit. Engineered for reliability with a minimum MTBF of 50,000 hours, they are suitable for indoor and outdoor applications. These displays provide superior colour accuracy, and wide viewing angles and are ideal for integration into complex and demanding environments.
US$16.45 – US$129.95
Easily connect 4D Systems gen4-4DCAPE Display Modules to BeagleBone Black boards with the gen4-4DCAPE-ADAPTOR. Supporting 4.3”, 5.0”, and 7.0” TFT displays with resistive or capacitive touch, it simplifies display integration while maintaining HAT standards and complete compatibility. Ideal for rapid development of reliable, high-quality embedded visual interfaces.
US$16.95
- A custom-embedded 4DGL graphics controller designed to interface with many popular OLED and LCD panels.
- The latest addition to the 4D Systems processor range, provides more power, more FLASH, more RAM, and more features.
US$18.50
The MicroSD Extension – 100mm provides flexible, external access to the micro SD card slot on 4D Systems display modules. Ideal for enclosed systems or development use, it features a push-push connector and a 100mm FPC cable for easy installation and use. Designed for latch-type sockets, it is compatible with all 4D Systems display modules.
US$19.95
- A custom embedded 4DGL graphics controller designed to interface with many popular OLED and LCD display panels.
- Latest addition to the 4D Systems processor range, providing more power, more FLASH, more RAM and more features than the PICASO Processor.
- The DIABLO16 is not available for purchase in our online store. This product page is up for informational purposes only. If you wish to purchase, please contact our sales team.
US$21.95
- 0.9", 80x160 pixel Intelligent Display Module
- Integrated WiFi ESP8266 Module
- Suitable for fast implementation of wireless GUI applications
- Through-Hole Mounting
- 4D Workshop4 IDE Compabitble
- Arduino IDE Compatible
US$21.95
The 4D ClearCore Adaptor provides a fast, reliable interface between Teknic’s ClearCore controller and 4D Systems' intelligent displays. Designed for seamless UART integration, it supports multiple display families and offers flexible power options. Featuring onboard USB programming and robust aluminium mounting, it's the ideal link between motion control systems and rich, touch-enabled HMI interfaces.
US$24.95
The 4D Programming Cable is a USB to Serial-TTL UART converter featuring the Silabs CP2102 chipset, designed for programming and interfacing 4D devices using a 5-pin 3.3V TTL header. It enables fast, reliable data transfer and direct PmmC/4DGL code uploads to 4D Systems modules, with integrated RESET circuitry and USB-powered operation via a 1m cable.
US$24.95
The uUSB-PA5-II is a compact, cost-effective USB to Serial-TTL UART bridge adaptor based on the Silicon Labs CP2104 chipset. Designed for easy integration with 4D Systems modules, it supports data rates up to 2 Mbps, USB 2.0 full-speed communication, and offers 3.3V/5V tolerant signals. Ideal for both prototyping and production, it features a standard mini USB connection.
US$24.95
The 4Discovery RS-485 Programmer is an essential hardware tool for programming, customising, and testing the 4Discovery module. The 4Discovery RS485 Programmer is used to program a new Firmware/PmmC, Display Driver and for transferring compiled Workshop4 Applications. It can even serve as an interface for communicating serial data to the PC. The 4D Programmer also supplies power to the 4Discovery, allowing it to be programmed on the bench or in the field.
US$24.95
The Mates Stand is an aluminium stand with an integrated PCB designed to provide a base platform for MatesBUS-based products for development or showcasing.
US$25.00
TIMI-96 is a unique breadboard-compatible display development module aimed to speed up and reinvent how electronic testing, development, and projects are carried out in stand-alone, host interface, PC-tethered, or educational settings.
TIMI is a 0.96” TFT LCD module driven directly by a PIXXI-28 graphics processor from 4D Labs. It features a unique MatesBus interface, which is simple to use in breadboard applications, on adaptors, or directly into developed products.
US$29.00 – US$39.00
TED-96 is the OEM version of the unique TIMI-96 module. It is aimed at product integration where the TED-96 form factor may not be suitable.
TED-96 is a 0.96” TFT IPS LCD display module driven directly by a PIXXI-28 graphics processor from 4D Labs. It features castellated and through-hole pads at each end, allowing for different mounting options.
US$29.00 – US$39.00
The microLCD Starter Kit includes everything necessary for developments with any microLCD Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a uUSB-PA5-II programmer, a microSD-4GB industrial card, a 150mm 5-way Female-Female jumper cable, and a 5-way Male-Male adaptor.
US$29.00
The 4Discovery Starter Kit includes everything necessary for developments with any 4Discovery Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a 4Discovery RS485 Programmer and microSD-4GB industrial card.
US$29.00
