Product Categories and Filters
The 4Discovery Starter Kit includes everything necessary for developments with any 4Discovery Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a 4Discovery RS485 Programmer and microSD-4GB industrial card.
US$29.00
The 4DLCD Series comprises a range of high-performance displays from 4D Systems. These displays are designed to meet a wide variety of engineering requirements. The series includes standard TFT LCDs as well as advanced TFT IPS displays, with models ranging from 1.44 to 9.0 inches. The displays offer options for capacitive touch and high-resolution interfaces, including MCU, SPI, and Parallel RGB-24bit. Engineered for reliability with a minimum MTBF of 50,000 hours, they are suitable for indoor and outdoor applications. These displays provide superior colour accuracy, and wide viewing angles and are ideal for integration into complex and demanding environments.
US$16.45 – US$129.95
The gen4-ESP32 Starter Kit includes everything necessary for developments with any gen4-ESP32 Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a 4D-UPA programmer, gen4-Breakout board, 150mm FFC cable, 4GB uSD industrial card, and WiFi antenna and cable.
US$39.00
The gen4-RP2350 Connection Kit includes everything necessary to connect the gen4-RP2350 Series displays I/O to any host board or breadboard. It comprises the 30-pin Flexible Flat Cable (15 cm long) and the gen4-RP2350-Breakout board.
US$7.00
The gen4-uLCD Starter Kit includes everything necessary for developments with any gen4-uLCD Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a 4D-UPA for serial debugging, gen4-RP2350-Breakout board, 150mm FFC cable, and microSD-4GB industrial card.
US$35.00
The gen4-uLCD Starter Kit includes everything necessary for developments with any gen4-uLCD Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes: 4D-UPA programmer, gen4-IB interface board, gen4-Breakout board, 150mm FFC cable, uSD-4GB industrial card.
US$39.00
The microLCD Starter Kit includes everything necessary for developments with any microLCD Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a uUSB-PA5-II programmer, a microSD-4GB industrial card, a 150mm 5-way Female-Female jumper cable, and a 5-way Male-Male adaptor.
US$29.00
The pixxiLCD Starter Kit includes everything necessary for developing applications with any pixxiLCD Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a 4D-UPA programmer, gen4-IB interface board, gen4-Breakout board, 15 to 30-way FFC, and microSD-4GB industrial card.
US$39.00
TIMI-96 is a unique breadboard-compatible display development module aimed to speed up and reinvent how electronic testing, development, and projects are carried out in stand-alone, host interface, PC-tethered, or educational settings.
TIMI is a 0.96” TFT LCD module driven directly by a PIXXI-28 graphics processor from 4D Labs. It features a unique MatesBus interface, which is simple to use in breadboard applications, on adaptors, or directly into developed products.
US$29.00 – US$39.00
TIMI-MB is a unique display development module designed to provide development boards/modules with a microBUS socket with a simple-to-interface display solution. It aims to speed up and reinvent the way electronic testing, development, and projects are carried out.
TIMI-MB is a 0.96” TFT LCD display module driven directly by a PIXXI28 graphics processor from 4D Labs. It features a microBUS interface designed to attach to development platforms with a microBUS socket or headers.
US$35.00 – US$45.00
TED-96 is the OEM version of the unique TIMI-96 module. It is aimed at product integration where the TED-96 form factor may not be suitable.
TED-96 is a 0.96” TFT IPS LCD display module driven directly by a PIXXI-28 graphics processor from 4D Labs. It features castellated and through-hole pads at each end, allowing for different mounting options.
US$29.00 – US$39.00
TIMI-130 is a unique breadboard-compatible display development module that aims to speed up and reinvent the way electronic testing, development, and projects are carried out in stand-alone, host interface, PC-tethered, or educational settings.
TIMI-130 is a 1.3” TFT LCD module driven directly by a PIXXI-28 graphics processor from 4D Labs. It features a unique MatesBus interface, which is simple to use in breadboard applications, on adaptors, or directly into developed products.
US$39.00 – US$49.00
TED-130X is the OEM version of the unique TIMI-130 and TIMI-130X modules. It is aimed at product integration where the TIMI-130 form factor may not be suitable.
TED-130X is a 1.3” TFT IPS LCD display module driven directly by a PIXXI-44 graphics processor from 4D Labs. It features castellated and through-hole pads at each end, allowing for different mounting options.
US$42.00 – US$52.00
REPTOR-250 is a unique breadboard-compatible display development module that aims to speed up and reinvent how electronic testing, development, and projects are carried out in stand-alone, host interface, PC-tethered, or educational settings.
REPTOR-250 is a 2.5” TFT LCD module with a capacitive touch panel driven directly by a PIXXI-44 graphics processor from 4D Labs. It features a unique MatesBus interface, which is simple to use in breadboard applications, on adaptors, or directly into developed products.
US$49.00 – US$59.00
These plastic bezels are designed to provide a sleek and secure mounting solution for uLCD and gen4-uLCD intelligent display modules. Available for a variety of display sizes and types, they facilitate easy panel mounting without the need for additional washers or complex drilling.
US$10.99 – US$19.95
This adaptor allows a standard Raspberry Pi to connect products of any TIMI or REPTOR models directly to the Raspberry Pi bus via the MatesBUS interface.
US$14.00
The MB Adaptor provides any board supporting the mikroBUS™ socket with a MatesBUS interface to connect any TIMI or REPTOR models directly.
US$9.00
The Mates Programmer is a simple USB programmer for the Breadboard Mates series. It provides a simple 5-way programming interface and a selection option for programming other devices.
US$10.00
MatesBUS Headers (2.54mm/0.1 pitch) are customised into a single moulding with side labels for convenience. Two models are available: flat and 45-degree angle viewing of the attached MatesBUS-compatible product, and they can be soldered on a PCB.
US$4.00 – US$5.00
Workshop4 IDE is a comprehensive software IDE for Microsoft Windows that provides an integrated software development platform for all of the 4D Systems family of processors and modules. It combines Editor, Compiler, Linker, and Downloader and offers four Development Environments for designing modern user interfaces and developing 4DGL applications. It is an all-in-one solution tailored for users of any skill level.
US$99.95
Workshop5
Workshop5 IDE builds on the trusted foundation of Workshop4, delivering a more advanced, flexible, and intuitive environment for developing GUIs on 4D Systems displays. Designed to support faster and more efficient embedded graphics development, it introduces enhanced tools, optimised workflows, and broader capabilities. Workshop5 is fully compatible with 4D Systems’ range of processors and modules, providing engineers with greater control, performance, and ease of integration across a wide variety of applications.
FREE
30-pin Flexible Flat Cable (FFC) with 0.5mm pitch (opposite way), available in length variable from 22mm to 200mm. Compatible with a standard 30-pin, 0.5mm pitch, 0.3mm thick FFC connector. This cable on one end has contacts on the top of the cable, and the other end has contacts at the bottom of the cable. The 4D-FFC- cables are ideal for connecting all the 4D Systems displays to any host board.
US$1.95 – US$2.95
4D Systems' gen4-FT81x Series are compact, intelligent display modules designed in the sleek gen4 form factor and based on Bridgetek's FT812 and FT813 graphics processors. These modules integrate high-resolution TFT LCD displays with resistive or capacitive touch options, all within a slim, robust design ideal for space-constrained projects.
The gen4-FT81x Series streamlines the development of interactive graphical user interfaces. It supports resolutions up to 800x480 pixels and features a simple SPI interface to a host microcontroller. It is ideal for industrial, medical, and consumer applications requiring sophisticated visuals and touch functionality.
US$59.95 – US$99.95
Elevate your product's user interface with the gen4-uLCD Series. These high-performance intelligent display modules range from 2.4" to 7.0", featuring multiple touch options, customisable cover bezels, wide viewing angles, and super bright display options. Powered by the robust and powerful DIABLO-16 processor, they offer exceptional performance and versatile connectivity.
Combining powerful hardware with vibrant touchscreen displays and versatile software tools, the gen4-uLCD series provides an all-in-one solution for adding advanced graphical interfaces to embedded systems—addressing the needs of professional developers seeking to enhance their projects with rich, interactive displays.
US$34.95 – US$214.95
