Product Categories and Filters
The gen4 Interface Board (gen4-IB) provides a simple, reliable connection between gen4 Intelligent Display Modules and external programming or host interfaces. It converts the 30-way FFC into five essential signals for programming and communication, supporting uUSB-PA5, uUSB-PA5-II, and 4D Programming Cable.
US$5.95
The gen4-Breakout Board offers direct access to all 30 signals from 4D gen4 and pixxiLCD modules via convenient through-hole pads. Featuring a 30-way top-contact FFC connector, it simplifies development, prototyping, and integration by eliminating conflicts with USB interfaces. Compatible with all 30-way FFC modules, it enables flexible, breadboard-friendly connections without requiring direct management of the FPC.
US$6.00
The gen4-Breakout Board offers direct access to all 30 signals from gen4-RP2350 Series display modules via convenient through-hole pads. Featuring a 30-way top-contact FFC connector, it simplifies development, prototyping, and integration by eliminating conflicts with USB interfaces. Compatible with all 30-way FFC modules, it enables flexible, breadboard-friendly connections without requiring direct management of the FPC.
US$6.00
The gen4-PA is a programming adaptor and breakout board for gen4 Intelligent Display Modules powered by Picaso or Diablo16 processors. It combines USB programming capability with easy access to all 30 FFC signals via 2.54mm pads. Compatible with Arduino and Raspberry Pi interfaces, it enables streamlined programming, prototyping, and integration without the need for a separate programmer.
US$10.95
The uVGA-III is a compact VGA graphics engine powered by the PICASO processor, supporting resolutions up to 800x480. It features a microSD card slot for multimedia storage, 13 GPIO pins, and interfaces including I²C and UART. Ideal for applications requiring rich graphics and audio output.
US$64.95
- Highly integrated serial camera module that can be attached to any host system that requires a video camera or a JPEG compressed still camera for embedded imaging applications.
- The module uses a CMOS VGA colour sensor along with a JPEG compression chip.
US$54.95
The uUSB-PA5-II is a compact, cost-effective USB to Serial-TTL UART bridge adaptor based on the Silicon Labs CP2104 chipset. Designed for easy integration with 4D Systems modules, it supports data rates up to 2 Mbps, USB 2.0 full-speed communication, and offers 3.3V/5V tolerant signals. Ideal for both prototyping and production, it features a standard mini USB connection.
US$24.95
The 4D Programming Cable is a USB to Serial-TTL UART converter featuring the Silabs CP2102 chipset, designed for programming and interfacing 4D devices using a 5-pin 3.3V TTL header. It enables fast, reliable data transfer and direct PmmC/4DGL code uploads to 4D Systems modules, with integrated RESET circuitry and USB-powered operation via a 1m cable.
US$24.95
The 4D Serial Pi Adaptor provides a simple, direct serial interface between Raspberry Pi boards and 4D Systems display modules using a 5-pin connection. Featuring a pass-through header design, it maintains compatibility with other Raspberry Pi accessories. Supplied with jumper cables, it supports 5V power and works with all Raspberry Pi models.
US$14.95
The 4D Serial Pi Adaptor provides a simple, direct serial interface between Raspberry Pi boards and 4D Systems display modules using a 5-pin connection. Featuring a pass-through header design, it maintains compatibility with other Raspberry Pi accessories. Supplied with jumper cables, it supports 5V power and works with all Raspberry Pi models.
US$9.95
- Please note that this product is not available directly from 4D Systems. You can purchase directly from Farnell HERE.
- 2.4" 320x240 pixels HAT Primary Display for the Raspberry PI.
- Plugs directly on top of the Raspberry Pi, compatible with A+, B+, Pi2, Pi3, Pi3 B+, Pi Zero, Pi Zero W and Pi4 Models.
- High speed SPI Interface with Compression Technology enables high speed graphics.
- See product description below for more details.
US$39.95
- 3.2" 320x240 resolution Primary Display for the Raspberry PI.
- Plugs directly on top of the Raspberry Pi
- Compatible with A+/B+/Pi2/Pi3/Zero/ZeroW only.
- High speed SPI Interface with Compression Technology enables high speed graphics.
US$54.95
