Product Categories and Filters
- Primary Dislplay LCD Cape for the Beagle Bone Black in gen4 form factor
- 4.3" LCD TFT
- 480 x 272 pixel resolution
- Resistive Touch
US$64.95
The uVGA-III is a compact VGA graphics engine powered by the PICASO processor, supporting resolutions up to 800x480. It features a microSD card slot for multimedia storage, 13 GPIO pins, and interfaces including I²C and UART. Ideal for applications requiring rich graphics and audio output.
US$64.95
The gen4-uLCD Starter Kit includes everything necessary for developments with any gen4-uLCD Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes: 4D-UPA programmer, gen4-IB interface board, gen4-Breakout board, 150mm FFC cable, uSD-4GB industrial card.
US$39.00
- Highly integrated serial camera module that can be attached to any host system that requires a video camera or a JPEG compressed still camera for embedded imaging applications.
- The module uses a CMOS VGA colour sensor along with a JPEG compression chip.
US$54.95
The MicroSD Extension – 100mm provides flexible, external access to the micro SD card slot on 4D Systems display modules. Ideal for enclosed systems or development use, it features a push-push connector and a 100mm FPC cable for easy installation and use. Designed for latch-type sockets, it is compatible with all 4D Systems display modules.
US$19.95
The 4D Serial Pi Adaptor provides a simple, direct serial interface between Raspberry Pi boards and 4D Systems display modules using a 5-pin connection. Featuring a pass-through header design, it maintains compatibility with other Raspberry Pi accessories. Supplied with jumper cables, it supports 5V power and works with all Raspberry Pi models.
US$14.95
- Primary Dislplay LCD Cape for the Beagle Bone Black in gen4 form factor
- 7.0" LCD TFT
- 800 x 480 pixel resolution
- Capacitive Touch with Cover Glass
- 3D Printable Enclosures available for Wall / Panel / Enclosure mounting. Check the download link in the downloads section.
US$109.95
The 4D-FPC-PIXXILCD is a 30-way, 0.5mm pitch flexible printed circuit cable, purpose-built for high-reliability connections between PIXXILCD intelligent display modules and carrier boards. Designed to support high-speed signal transmission with minimal loss, it ensures mechanical flexibility and durability in space-constrained embedded applications, enabling clean, robust integration in professional and industrial environments.
US$2.50
7.0", 800x480 pixel Display Cape for the BeagleBone Black with Resistive Touch. Includes 7 push buttons and connects directly on top of the BeagleBone Black.
US$99.95
4.3", 480x272 pixel Display Cape for the BeagleBone Black with Resistive Touch. Includes 7 push buttons and connects directly on top of the BeagleBone Black.
US$64.95
The microLCD Series comprises intelligent display modules for embedded systems and human-machine interface (HMI) applications. These displays integrate advanced graphics processors—GOLDELOX, PICASO, and DIABLO-16—to deliver rich graphics capabilities, touch interaction, and multimedia support. Available in sizes from 1.44 inches to 10.4 inches, the series caters to diverse application requirements. Each module supports touch panels with resistive or capacitive options and can include Cover Lens Bezels (CLBs) for enhanced durability and aesthetic appeal. Supported by the Workshop4 development software, the microLCD Series enables rapid development and seamless integration into various embedded platforms.
US$39.95 – US$245.95
The gen4-PA is a programming adaptor and breakout board for gen4 Intelligent Display Modules powered by Picaso or Diablo16 processors. It combines USB programming capability with easy access to all 30 FFC signals via 2.54mm pads. Compatible with Arduino and Raspberry Pi interfaces, it enables streamlined programming, prototyping, and integration without the need for a separate programmer.
US$10.95
The 4D Programming Cable is a USB to Serial-TTL UART converter featuring the Silabs CP2102 chipset, designed for programming and interfacing 4D devices using a 5-pin 3.3V TTL header. It enables fast, reliable data transfer and direct PmmC/4DGL code uploads to 4D Systems modules, with integrated RESET circuitry and USB-powered operation via a 1m cable.
US$24.95
The uUSB-PA5-II is a compact, cost-effective USB to Serial-TTL UART bridge adaptor based on the Silicon Labs CP2104 chipset. Designed for easy integration with 4D Systems modules, it supports data rates up to 2 Mbps, USB 2.0 full-speed communication, and offers 3.3V/5V tolerant signals. Ideal for both prototyping and production, it features a standard mini USB connection.
US$24.95
These plastic bezels are designed to provide a sleek and secure mounting solution for uLCD and gen4-uLCD intelligent display modules. Available for a variety of display sizes and types, they facilitate easy panel mounting without the need for additional washers or complex drilling.
US$10.99 – US$19.95
The gen4-Breakout Board offers direct access to all 30 signals from 4D gen4 and pixxiLCD modules via convenient through-hole pads. Featuring a 30-way top-contact FFC connector, it simplifies development, prototyping, and integration by eliminating conflicts with USB interfaces. Compatible with all 30-way FFC modules, it enables flexible, breadboard-friendly connections without requiring direct management of the FPC.
US$6.00
The gen4-RP2530 Series features high-performance display modules ranging from 2.4” to 9.0”, with both touch and non-touch options. Powered by the Raspberry Pi RP2350 microcontroller, these displays offer robust performance, enhanced security features, and versatile connectivity.
The RP2350’s dual-core architecture and comprehensive security make this series ideal for secure, professional-grade applications that require modern UI.
US$39.00 – US$175.00
The 4DLCD Series comprises a range of high-performance displays from 4D Systems. These displays are designed to meet a wide variety of engineering requirements. The series includes standard TFT LCDs as well as advanced TFT IPS displays, with models ranging from 1.44 to 9.0 inches. The displays offer options for capacitive touch and high-resolution interfaces, including MCU, SPI, and Parallel RGB-24bit. Engineered for reliability with a minimum MTBF of 50,000 hours, they are suitable for indoor and outdoor applications. These displays provide superior colour accuracy, and wide viewing angles and are ideal for integration into complex and demanding environments.
US$16.45 – US$129.95
Enhance your development setup with the 5 5-pin ribbon cable from 4D Systems. Designed for compatibility with our intelligent display modules, this 5-way female-to-female ribbon cable, accompanied by a male-to-male adapter, offers flexible and reliable serial communication. Ideal for prototyping and integration, it ensures seamless connections between your display modules and host systems, streamlining your development process.
US$3.00
- 0.9", 80x160 pixel Intelligent Display Module
- Integrated WiFi ESP8266 Module
- Suitable for fast implementation of wireless GUI applications
- Through-Hole Mounting
- 4D Workshop4 IDE Compabitble
- Arduino IDE Compatible
US$21.95
Thanks to the widely used ESP32 microcontroller, the gen4-ESP32 range is designed to cater to the dynamic needs of the IoT industry. With Bluetooth and Wi-Fi connectivity, this line includes 2.4″ to 9″ displays, various touch panel options, and Cover Lens Bezel.
The extended software compatibility and the gen4 robust hardware design make the gen4-ESP32 product line ideal for any application that requires modern UI and extended connectivity.
US$39.00 – US$175.00
30-pin Flexible Flat Cable (FFC) with 0.5mm pitch (opposite way), available in length variable from 22mm to 200mm. Compatible with a standard 30-pin, 0.5mm pitch, 0.3mm thick FFC connector. This cable on one end has contacts on the top of the cable, and the other end has contacts at the bottom of the cable. The 4D-FFC- cables are ideal for connecting all the 4D Systems displays to any host board.
US$1.95 – US$2.95
The gen4 Interface Board (gen4-IB) provides a simple, reliable connection between gen4 Intelligent Display Modules and external programming or host interfaces. It converts the 30-way FFC into five essential signals for programming and communication, supporting uUSB-PA5, uUSB-PA5-II, and 4D Programming Cable.
US$5.95
The 4D ClearCore Adaptor provides a fast, reliable interface between Teknic’s ClearCore controller and 4D Systems' intelligent displays. Designed for seamless UART integration, it supports multiple display families and offers flexible power options. Featuring onboard USB programming and robust aluminium mounting, it's the ideal link between motion control systems and rich, touch-enabled HMI interfaces.
US$24.95
