Product Categories and Filters
The gen4 Interface Board (gen4-IB) provides a simple, reliable connection between gen4 Intelligent Display Modules and external programming or host interfaces. It converts the 30-way FFC into five essential signals for programming and communication, supporting uUSB-PA5, uUSB-PA5-II, and 4D Programming Cable.
US$5.95
The gen4-Breakout Board offers direct access to all 30 signals from 4D gen4 and pixxiLCD modules via convenient through-hole pads. Featuring a 30-way top-contact FFC connector, it simplifies development, prototyping, and integration by eliminating conflicts with USB interfaces. Compatible with all 30-way FFC modules, it enables flexible, breadboard-friendly connections without requiring direct management of the FPC.
US$6.00
The gen4-Breakout Board offers direct access to all 30 signals from gen4-RP2350 Series display modules via convenient through-hole pads. Featuring a 30-way top-contact FFC connector, it simplifies development, prototyping, and integration by eliminating conflicts with USB interfaces. Compatible with all 30-way FFC modules, it enables flexible, breadboard-friendly connections without requiring direct management of the FPC.
US$6.00
The gen4-PA is a programming adaptor and breakout board for gen4 Intelligent Display Modules powered by Picaso or Diablo16 processors. It combines USB programming capability with easy access to all 30 FFC signals via 2.54mm pads. Compatible with Arduino and Raspberry Pi interfaces, it enables streamlined programming, prototyping, and integration without the need for a separate programmer.
US$10.95
The uVGA-III is a compact VGA graphics engine powered by the PICASO processor, supporting resolutions up to 800x480. It features a microSD card slot for multimedia storage, 13 GPIO pins, and interfaces including I²C and UART. Ideal for applications requiring rich graphics and audio output.
US$64.95
- Highly integrated serial camera module that can be attached to any host system that requires a video camera or a JPEG compressed still camera for embedded imaging applications.
- The module uses a CMOS VGA colour sensor along with a JPEG compression chip.
US$54.95
The uUSB-PA5-II is a compact, cost-effective USB to Serial-TTL UART bridge adaptor based on the Silicon Labs CP2104 chipset. Designed for easy integration with 4D Systems modules, it supports data rates up to 2 Mbps, USB 2.0 full-speed communication, and offers 3.3V/5V tolerant signals. Ideal for both prototyping and production, it features a standard mini USB connection.
US$24.95
The 4D Programming Cable is a USB to Serial-TTL UART converter featuring the Silabs CP2102 chipset, designed for programming and interfacing 4D devices using a 5-pin 3.3V TTL header. It enables fast, reliable data transfer and direct PmmC/4DGL code uploads to 4D Systems modules, with integrated RESET circuitry and USB-powered operation via a 1m cable.
US$24.95
The 4D Serial Pi Adaptor provides a simple, direct serial interface between Raspberry Pi boards and 4D Systems display modules using a 5-pin connection. Featuring a pass-through header design, it maintains compatibility with other Raspberry Pi accessories. Supplied with jumper cables, it supports 5V power and works with all Raspberry Pi models.
US$14.95
The 4D Serial Pi Adaptor provides a simple, direct serial interface between Raspberry Pi boards and 4D Systems display modules using a 5-pin connection. Featuring a pass-through header design, it maintains compatibility with other Raspberry Pi accessories. Supplied with jumper cables, it supports 5V power and works with all Raspberry Pi models.
US$9.95
- Please note that this product is not available directly from 4D Systems. You can purchase directly from Farnell HERE.
- 2.4" 320x240 pixels HAT Primary Display for the Raspberry PI.
- Plugs directly on top of the Raspberry Pi, compatible with A+, B+, Pi2, Pi3, Pi3 B+, Pi Zero, Pi Zero W and Pi4 Models.
- High speed SPI Interface with Compression Technology enables high speed graphics.
- See product description below for more details.
US$39.95
- 3.2" 320x240 resolution Primary Display for the Raspberry PI.
- Plugs directly on top of the Raspberry Pi
- Compatible with A+/B+/Pi2/Pi3/Zero/ZeroW only.
- High speed SPI Interface with Compression Technology enables high speed graphics.
US$54.95
- 3.5" 480x320 resolution Primary Display for the Raspberry PI.
- Plugs directly on top of the Raspberry Pi
- compatible with A+/B+/Pi2/Pi3/Zero/ZeroW only.
- High speed SPI Interface with Compression Technology enables high speed graphics.
US$74.95
- Primary Display for Raspberry Pi
- 4.3" LCD TFT
- 480 x 272 pixels
- Resistive Touch
- Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi4, Pi Zero and Pi Zero W.
US$49.95
- Primary Display for Raspberry Pi
- 4.3" LCD TFT
- 480 x 272 pixels
- Capacitive Touch with Cover Glass
- Compatible with Raspberry Pi A+, B+, Pi2, Pi3, P3 B+, Pi4, Pi Zero and Pi Zero W.
- 3D Printable Enclosures available for Wall / Panel / Enclosure mounting. Check the download link in the downloads section.
US$69.95
- Primary Display for Raspberry Pi
- 5.0" LCD TFT
- 800 x 480 pixels
- Resistive Touch
- Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi4, Pi Zero and Pi Zero W.
US$75.95
- Primary Display for Raspberry Pi
- 5.0" LCD TFT
- 800 x 480 pixels
- Capacitive Touch with Cover Glass
- Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi4, Pi Zero and Pi Zero W.
- 3D Printable Enclosures available for Wall / Panel / Enclosure mounting. Check the download link in the downloads section.
US$79.95
- Primary Display for Raspberry Pi
- 7.0" LCD TFT
- 800 x 480 pixels
- Resistive Touch
- Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi4, Pi Zero and Pi Zero W.
US$85.95
- Primary Display for Raspberry Pi
- 7.0" LCD TFT
- 800 x 480 pixels
- Capacitive Touch with Cover Glass
- Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi4, Pi Zero and Pi Zero W.
- 3D Printable Enclosures available for Wall / Panel / Enclosure mounting. Check the download link in the downloads section.
US$89.95
The gen4-4DPI-Adaptor enables seamless connection between Raspberry Pi boards and 4D Systems gen4-4DPI Primary Displays. Supporting resistive and capacitive models across 4.3", 5.0", and 7.0" sizes, it delivers high-speed SPI communication, touch control, and complete primary display functionality without external power. Compatible with all Raspberry Pi models.
US$12.95
4.3", 480x272 pixel Display Cape for the BeagleBone Black. Includes 7 push buttons and connects directly on top of the BeagleBone Black.
US$54.95
4.3", 480x272 pixel Display Cape for the BeagleBone Black with Resistive Touch. Includes 7 push buttons and connects directly on top of the BeagleBone Black.
US$64.95
7.0", 800x480 pixel Display Cape for the BeagleBone Black with Resistive Touch. Includes 7 push buttons and connects directly on top of the BeagleBone Black.
US$99.95
- Primary Dislplay LCD Cape for the Beagle Bone Black in gen4 form factor
- 4.3" LCD TFT
- 480 x 272 pixel resolution
- Resistive Touch
US$64.95
- Primary Dislplay LCD Cape for the Beagle Bone Black in gen4 form factor
- 4.3" LCD TFT
- 480 x 272 pixel resolution
- Capacitive Touch with Cover Glass
- 3D Printable Enclosures available for Wall / Panel / Enclosure mounting. Check the download link in the downloads section.
US$74.95
- Primary Dislplay LCD Cape for the Beagle Bone Black in gen4 form factor
- 5.0" LCD TFT
- 800 x 480 pixel resolution
- Resistive Touch
US$84.95
- Primary Dislplay LCD Cape for the Beagle Bone Black in gen4 form factor
- 5.0" LCD TFT
- 800 x 480 pixel resolution
- Capacitive Touch with Cover Glass
- 3D Printable Enclosures available for Wall / Panel / Enclosure mounting. Check the download link in the downloads section.
US$89.95
- Primary Dislplay LCD Cape for the Beagle Bone Black in gen4 form factor
- 7.0" LCD TFT
- 800 x 480 pixel resolution
- Resistive Touch
US$99.95
- Primary Dislplay LCD Cape for the Beagle Bone Black in gen4 form factor
- 7.0" LCD TFT
- 800 x 480 pixel resolution
- Capacitive Touch with Cover Glass
- 3D Printable Enclosures available for Wall / Panel / Enclosure mounting. Check the download link in the downloads section.
US$109.95
Easily connect 4D Systems gen4-4DCAPE Display Modules to BeagleBone Black boards with the gen4-4DCAPE-ADAPTOR. Supporting 4.3”, 5.0”, and 7.0” TFT displays with resistive or capacitive touch, it simplifies display integration while maintaining HAT standards and complete compatibility. Ideal for rapid development of reliable, high-quality embedded visual interfaces.
US$16.95
- 0.9", 80x160 pixel Intelligent Display Module
- Integrated WiFi ESP8266 Module
- Suitable for fast implementation of wireless GUI applications
- Through-Hole Mounting
- 4D Workshop4 IDE Compabitble
- Arduino IDE Compatible
US$21.95
- Tiny Audio-Sound module that can play MP3 audio files stored on a micro-SD card (or USB 2.0 Flash drive with extra components).
- Features an on-board 16bit MCU specifically designed for hardware audio decoding.
- Supports FAT16 and FAT32 formatted micro-SD and USB Flash Drives.
US$29.95
The MicroSD Extension – 100mm provides flexible, external access to the micro SD card slot on 4D Systems display modules. Ideal for enclosed systems or development use, it features a push-push connector and a 100mm FPC cable for easy installation and use. Designed for latch-type sockets, it is compatible with all 4D Systems display modules.
US$19.95
The 4D ClearCore Adaptor provides a fast, reliable interface between Teknic’s ClearCore controller and 4D Systems' intelligent displays. Designed for seamless UART integration, it supports multiple display families and offers flexible power options. Featuring onboard USB programming and robust aluminium mounting, it's the ideal link between motion control systems and rich, touch-enabled HMI interfaces.
US$24.95
Enhance your development setup with the 5 5-pin ribbon cable from 4D Systems. Designed for compatibility with our intelligent display modules, this 5-way female-to-female ribbon cable, accompanied by a male-to-male adapter, offers flexible and reliable serial communication. Ideal for prototyping and integration, it ensures seamless connections between your display modules and host systems, streamlining your development process.
US$3.00
Designed for critical embedded environments, this 4GB Industrial Grade micro SD Card offers exceptional reliability, advanced firmware protection, and SPI compatibility. Ideal for 4D Systems' intelligent displays, it prevents Read Disturb errors and ensures data integrity under high read/write demands. With industrial temperature tolerance and Phison-certified performance, it’s the recommended storage solution for graphics, logging, and robust applications.
US$29.95
