Product Categories and Filters
4.3", 480x272 pixel Display Cape for the BeagleBone Black with Resistive Touch. Includes 7 push buttons and connects directly on top of the BeagleBone Black.
US$64.95
The uVGA-III is a compact VGA graphics engine powered by the PICASO processor, supporting resolutions up to 800x480. It features a microSD card slot for multimedia storage, 13 GPIO pins, and interfaces including I²C and UART. Ideal for applications requiring rich graphics and audio output.
US$64.95
4.3", 480x272 pixel Display Cape for the BeagleBone Black. Includes 7 push buttons and connects directly on top of the BeagleBone Black.
US$54.95
- 3.2" 320x240 resolution Primary Display for the Raspberry PI.
- Plugs directly on top of the Raspberry Pi
- Compatible with A+/B+/Pi2/Pi3/Zero/ZeroW only.
- High speed SPI Interface with Compression Technology enables high speed graphics.
US$54.95
- Highly integrated serial camera module that can be attached to any host system that requires a video camera or a JPEG compressed still camera for embedded imaging applications.
- The module uses a CMOS VGA colour sensor along with a JPEG compression chip.
US$54.95
- Primary Display for Raspberry Pi
- 4.3" LCD TFT
- 480 x 272 pixels
- Resistive Touch
- Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi4, Pi Zero and Pi Zero W.
US$49.95
- Please note that this product is not available directly from 4D Systems. You can purchase directly from Farnell HERE.
- 2.4" 320x240 pixels HAT Primary Display for the Raspberry PI.
- Plugs directly on top of the Raspberry Pi, compatible with A+, B+, Pi2, Pi3, Pi3 B+, Pi Zero, Pi Zero W and Pi4 Models.
- High speed SPI Interface with Compression Technology enables high speed graphics.
- See product description below for more details.
US$39.95
The gen4-ESP32 Starter Kit includes everything necessary for developments with any gen4-ESP32 Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a 4D-UPA programmer, gen4-Breakout board, 150mm FFC cable, 4GB uSD industrial card, and WiFi antenna and cable.
US$39.00
The pixxiLCD Starter Kit includes everything necessary for developing applications with any pixxiLCD Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a 4D-UPA programmer, gen4-IB interface board, gen4-Breakout board, 15 to 30-way FFC, and microSD-4GB industrial card.
US$39.00
The gen4-uLCD Starter Kit includes everything necessary for developments with any gen4-uLCD Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes: 4D-UPA programmer, gen4-IB interface board, gen4-Breakout board, 150mm FFC cable, uSD-4GB industrial card.
US$39.00
The gen4-uLCD Starter Kit includes everything necessary for developments with any gen4-uLCD Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a 4D-UPA for serial debugging, gen4-RP2350-Breakout board, 150mm FFC cable, and microSD-4GB industrial card.
US$35.00
- Tiny Audio-Sound module that can play MP3 audio files stored on a micro-SD card (or USB 2.0 Flash drive with extra components).
- Features an on-board 16bit MCU specifically designed for hardware audio decoding.
- Supports FAT16 and FAT32 formatted micro-SD and USB Flash Drives.
US$29.95
Designed for critical embedded environments, this 4GB Industrial Grade micro SD Card offers exceptional reliability, advanced firmware protection, and SPI compatibility. Ideal for 4D Systems' intelligent displays, it prevents Read Disturb errors and ensures data integrity under high read/write demands. With industrial temperature tolerance and Phison-certified performance, it’s the recommended storage solution for graphics, logging, and robust applications.
US$29.95
The 4Discovery Starter Kit includes everything necessary for developments with any 4Discovery Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a 4Discovery RS485 Programmer and microSD-4GB industrial card.
US$29.00
The microLCD Starter Kit includes everything necessary for developments with any microLCD Series display. It is highly recommended for first-time users and can be added to any display model.
The starter kit includes a uUSB-PA5-II programmer, a microSD-4GB industrial card, a 150mm 5-way Female-Female jumper cable, and a 5-way Male-Male adaptor.
US$29.00
The 4Discovery RS-485 Programmer is an essential hardware tool for programming, customising, and testing the 4Discovery module. The 4Discovery RS485 Programmer is used to program a new Firmware/PmmC, Display Driver and for transferring compiled Workshop4 Applications. It can even serve as an interface for communicating serial data to the PC. The 4D Programmer also supplies power to the 4Discovery, allowing it to be programmed on the bench or in the field.
US$24.95
The uUSB-PA5-II is a compact, cost-effective USB to Serial-TTL UART bridge adaptor based on the Silicon Labs CP2104 chipset. Designed for easy integration with 4D Systems modules, it supports data rates up to 2 Mbps, USB 2.0 full-speed communication, and offers 3.3V/5V tolerant signals. Ideal for both prototyping and production, it features a standard mini USB connection.
US$24.95
The 4D Programming Cable is a USB to Serial-TTL UART converter featuring the Silabs CP2102 chipset, designed for programming and interfacing 4D devices using a 5-pin 3.3V TTL header. It enables fast, reliable data transfer and direct PmmC/4DGL code uploads to 4D Systems modules, with integrated RESET circuitry and USB-powered operation via a 1m cable.
US$24.95
The 4D ClearCore Adaptor provides a fast, reliable interface between Teknic’s ClearCore controller and 4D Systems' intelligent displays. Designed for seamless UART integration, it supports multiple display families and offers flexible power options. Featuring onboard USB programming and robust aluminium mounting, it's the ideal link between motion control systems and rich, touch-enabled HMI interfaces.
US$24.95
- 0.9", 80x160 pixel Intelligent Display Module
- Integrated WiFi ESP8266 Module
- Suitable for fast implementation of wireless GUI applications
- Through-Hole Mounting
- 4D Workshop4 IDE Compabitble
- Arduino IDE Compatible
US$21.95
- A custom embedded 4DGL graphics controller designed to interface with many popular OLED and LCD display panels.
- Latest addition to the 4D Systems processor range, providing more power, more FLASH, more RAM and more features than the PICASO Processor.
- The DIABLO16 is not available for purchase in our online store. This product page is up for informational purposes only. If you wish to purchase, please contact our sales team.
US$21.95
These plastic bezels are designed to provide a sleek and secure mounting solution for uLCD and gen4-uLCD intelligent display modules. Available for a variety of display sizes and types, they facilitate easy panel mounting without the need for additional washers or complex drilling.
Price range: US$10.99 through US$19.95
The MicroSD Extension – 100mm provides flexible, external access to the micro SD card slot on 4D Systems display modules. Ideal for enclosed systems or development use, it features a push-push connector and a 100mm FPC cable for easy installation and use. Designed for latch-type sockets, it is compatible with all 4D Systems display modules.
US$19.95
- A custom-embedded 4DGL graphics controller designed to interface with many popular OLED and LCD panels.
- The latest addition to the 4D Systems processor range, provides more power, more FLASH, more RAM, and more features.
US$18.50
